Updates zu EdgeTX, 4-in-1 Modul und ExpressLRS
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
Updates zu EdgeTX, 4-in-1 Modul und ExpressLRS
Ciao Zämme
Dieser Thread ist wie angekündigt für die Benachrichtigung von neuen Updates bezüglich der Software Module von:
- EdgeTX (http://edgetx.org/)
- Multiprotokoll bzw. 4-in-1 Modul (https://github.com/pascallanger/DIY-Multiprotocol-TX-Module)
- ExpressLRS (https://www.expresslrs.org)
Weitere Details finden sich in Thread Fernsteuerungen auf Basis von EdgeTX, Multiprotokoll Modul (4-in-1) und/oder ExpressLRS
Danke & aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
EdgeTX/edgetx Updates seit 25.11.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt EdgeTX/edgetx (https://github.com/EdgeTX/edgetx/) seit dem 25.11.2022:
v2.8.0 - 27.11.2022
- Complete overhaul of UI framework for color screen radios (now implemented using LVGL). What does this mean for you? Many of the screens are now more optimised for use on a touch screen, work better with different screen orientations and sizes (i.e. the landscape RadioMaster TX16S vs portrait Flysky NV14), and reduce the amount of scrolling you need to do to find stuff. This includes most of the Radio Setup screens, and most of the Model Setup screens such as the first tab, Inputs tab, Mixes tab, Outputs tab and Flight Modes tab, as well as the edit screens for each of these. With the remainder to come in the next release. Check this video out to see what it looked like during development.
- New model select screen, and method of organising models. The new model labelling system is very powerful, as it allows you to add multiple labels to a single model - i.e. "Favorite" and "Plane", or "Helicopter" and "Flybarless". You can then filter the model list by any of these labels, or by any combination of them. This allows you to quickly find the model you want to fly, without having to scroll through a long list of models. It also removes another pain point - which is adding models to a transmitter - the new label system will auto-import any new models into the "Unlabeled" view, where you can then label them as you see fit. For users with a large number of models with model images it will open a lot faster, as it now loads images as you scroll through the list rather than all at once. For a look at what this looked like during development, see this video.
- When setting model/receiver IDs, the firmware will now tell you if the number is unique (not already used) or if it is in use by another model (and which!!) - and better than that, only IF it is using the same RF protocol (since you don't care about the ID of a model using a different protocol).
- Fix for a bug in the STM32 SD card library that caused intermittent excessive startup times for some radios/SD card combinations, as well as possibly being the culprit behind some EM's that were blamed on the stock SD card #2210
- Reduced the risk of corrupt radio.yml ruining your day by using a checksum to detect file corruption (i.e. due to faulty SD card, battery going flat in the middle of writing to the SD card). If the settings are corrupt, the radio will now warn you, automatically rename the file to radio_error.yml, and prompt you to recalibrate your analog inputs (sticks, 6POS, sliders, etc) so you have working settings. You can then examine the file later to find out what went wrong. If you want to manually edit the file, there is a new parameter at the top of the file (manuallyEdited) that you can change so the error check is skipped once (see #1481). Additionally, some radios (typically color screen radios) which were suffering from occasional extra long startup or SD card corruption should hopefully no longer do this (#2210).
- Lua API has been extended so it is possible to recreate the built-in widgets with Lua (#2279). Lua widgets can also override the built-in widgets (#2208). And they can be translated (#2275).
- On radios with software controllable power of the AUX1 and AUX2 serial UARTs, you can now turn the power on and off via the Radio Settings => Hardware tab (#1848).
- New special function for color screen radios that lets you set which main view screen is active.
- Radio firmware now better indicates whether it is a nightly build, a pull request test build, or a self-compiled build, as viewable in the Radio Settings => Version tab (#1850).
- Lua Tools list in Radio/SYS menu sorted alphabetically also on B&W radios (#2258).
- Add acoustic and/or haptic feedback for touch events depending on radio settings (#2193). As well as more consistently for hard keys on colorlcd radios.
- More rotary encoder options for B&W radios. Allows for inversion of both vertical and horizontal UI movement (see #2045).
- Timers can now show time remaining or time elapsed (#2038), and voice announcements will change to minutes if the timer is longer than 10 minutes (#1891).
- Add channel outputs to logging (#2122).
- Color screen radios can also access the OneBit option potentially reducing the need to hardware mod your radio (#1994).
- Voice prompt when min and max trim reached (rather than just beeping) (#1955).
- ExpressLRS will soon support native baro/vario receivers - thus support for that telemetry was added (#2253).
- Support for 6D SpaceMouse serial module as an additional input for Horus-family radios (see #1853).
- X10/X12S: Int/Ext Antenna UI options and menu (#1765).
- telemetry: Extend link quality warnings range - i.e. useful for ELRS now (#2251).
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
pascallanger/DIY-Multiprotocol-TX-Module Updates seit 08.07.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt pascallanger/DIY-Multiprotocol-TX-Module (https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/) seit dem 08.07.2022:
v1.3.3.20 - 12.10.2022
- V761/TOPRC
* New protocol for the Top RC Hobby Spitfire, P51D, BF-109 - FX/620
* New protocol for the FX620 SU35 - MT99XX2/PA18
* New protocol for the PA18 mini - UNTESTED and only 1 ID - Kyosho2/KT-17
* New protocol - UNTESTED and only 1 ID - DSM Fwd Programming
* Some improvements - Multi core
* Use new compiler version
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 09.09.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 09.09.2022:
3.0.1 - 21.10.2022
- Arming must be on AUX1 for safety and feature reasons, having this fixed allows us to maintain small packet sizes and deliver better aux channel options
- Be sure to flash both the TX and RX.
- Lua script MUST be updated to elrsV3.lua and is backwards compatible with 2.x. Get it here: Lua
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 21.10.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 21.10.2022:
3.1.1 - 09.12.2022
- Arming must be on AUX1 for safety and feature reasons, having this fixed allows us to maintain small packet sizes and deliver better aux channel options
- Be sure to flash both the TX and RX.
- Lua script MUST be updated to elrsV3.lua and is backwards compatible with 2.x. Get it here: Lua
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 09.12.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 09.12.2022:
3.1.2 - 23.12.2022
- N/A
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 23.12.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 23.12.2022:
3.2.0 - 23.01.2023
- Arming must be on AUX1 for safety and feature reasons, having this fixed allows us to maintain small packet sizes and deliver better aux channel options
- Be sure to flash both the TX and RX.
- Lua script MUST be updated to elrsV3.lua and is backwards compatible with 2.x. Get it here: Lua
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 23.01.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 23.01.2023:
2.5.2 - 09.02.2023
- Arming state must be HIGH on AUX1 for safety and feature reasons
- This update is not required for most users and is only meant to fix some small issues.
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
EdgeTX/edgetx Updates seit 27.11.2022 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt EdgeTX/edgetx (https://github.com/EdgeTX/edgetx/) seit dem 27.11.2022:
v2.8.1 - 18.02.2023
- Radiomaster Boxer radio support by @3djc in #2876, Companion support by @pfeerick in #2910
- Improved EL18/NV14 ELRS "err" count and ability to use higher baud rates by @richardclli in #3028
- EL18: Added support for Flysky FRM303 AFHDS3 module by @richardclli in #3029
- On colorlcd radios, there is now a "Quick Model Select" option that allows for a double tap to switch models by @philmoz in #2895
- Hopefully the issues with radios with smaller Flash memory (e.g. X9D family of radios) not being able to be reliably updated via bootloader have been resolved (as well as clawing back some precious RAM on B&W radios) through a combination of #2991, #2993, #3032 & #3169
- Fix issue where unable to import OTX model and radio settings from EEPROM by @raphaelcoeffic in #3200
- Fix EL18/NV14 charge screen lock up by @gagarinlg in #3179
- Fix carryTrim in LUA by @3djc in #2995
- Fix issue where out-of-order mixes would output but not be visible on radio by @raphaelcoeffic in #3172
- Fix display of model notes when selecting a model by @philmoz in #2922
- Fix Companion not saving due to incorrect file extension by @elecpower in #3025
- And many smaller fixes, and improvements to both Companion and radio firmware.
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 09.02.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 09.02.2023:
3.2.1 - 03.04.2023
- Arming must be on AUX1 for safety and feature reasons, having this fixed allows us to maintain small packet sizes and deliver better aux channel options
- Be sure to flash both the TX and RX.
- Lua script MUST be updated to elrsV3.lua and is backwards compatible with 2.x. Get it here: Lua
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
EdgeTX/edgetx Updates seit 01.04.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt EdgeTX/edgetx (https://github.com/EdgeTX/edgetx/) seit dem 01.04.2023:
v2.8.3 - 20.04.2023
- fix: Incorrect subprotocol count causing simulator crash by @mha1 in #3426
- fix: Undesired MPM protocol selection changes by @mha1 in #3444
- fix(color): MPM protocol setting not always saved to storage by @pfeerick in aa78e10
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
EdgeTX/edgetx Updates seit 20.04.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt EdgeTX/edgetx (https://github.com/EdgeTX/edgetx/) seit dem 20.04.2023:
v2.8.4 - 16.05.2023
- fix: Removed ability to format SD card on currently running firmware since that is a very bad idea (64b75cb)
- fix: Undetected firmware overflows - fixes broken X9D+2019 firmware (#3555)
- fix: Debug key names for Boxer (#3536)
- fix: Fix for Swedish translation builds (2d8d749)
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
ExpressLRS/ExpressLRS Updates seit 03.04.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt ExpressLRS/ExpressLRS (https://github.com/ExpressLRS/ExpressLRS/) seit dem 03.04.2023:
3.3.0 - 21.07.2023
- Improved autobaud detection with handsets #2283
- Don't reduce Wide switch channel bit depth when TLM is off #2282
- Allow relay RX to accept telemetry from a TX module #2287
- Correct RadioMaster PWM Rx VBAT scaling #2268 #2292
- Fixes the firmware options and buzzer for STM targets #2295
- Return wifi to R9M backpack upload methods #2299
- Add missing isFirstRxIrq to sx127x #2301
- Append prior target name to firmware to remove incorrect target mismatch warnings #2306
- Jumper T-20 2400 and 900 target #2298 #2303
- Happymodel ES900 Dual RX target #2304
- Sub250 2400 RX target #2310
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
EdgeTX/edgetx Updates seit 16.05.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt EdgeTX/edgetx (https://github.com/EdgeTX/edgetx/) seit dem 16.05.2023:
v2.8.5 - 05.08.2023
- fix: On radios with configurable internal modules, Emergency Mode did not know the RF module type, resulting in an inability to re-establish the RF link if Emergency Mode was triggered #3603
- fix: Filling up the radio SD card (i.e. logging, screenshots) could result in radio going into Emergency Mode. Logging and screenshots are now disabled when less than 50MB free space remaining. #3739
- fix(colorlcd): Pressing TELE while setting up widgets would load the screen settings tab on top of itself, which could eventually trigger Emergency Mode #3845
- fix(mpm): External MPM would not always do protocol discovery, resulting in missing protocols #3763
- fix: Some AFHDS2A/AFHDS3 GPS/ALT telemetry handling issues which were introduced in earlier 2.8.x versions #3582
- fix(cpn): Include openssl files with Windows and Linux packages, fixing "Unable to download Meta Data / TLS initialization failed" errors preventing download of updates
- feat(cpn): Companion now warns you that you may break things if you use an older version of Companion with a newer firmware version
Aes liebs Grüessli
rOger
- rOger
- Beiträge: 134
- Registriert seit: 05.07.2018
- Punkte: 295
EdgeTX/edgetx Updates seit 05.08.2023 [::]
Salue Zämme
Hier wieder ein Update zum Github Projekt EdgeTX/edgetx (https://github.com/EdgeTX/edgetx/) seit dem 05.08.2023:
v2.9.0 - 02.09.2023
- LVGL re-write for the color screen interface is now complete. In doing so, there have been numerous improvements to the curves, special functions, logical switches and telemetry screens. Many thanks to @philmoz for doing a lot of the heavy lifting here.
- Various tabs can be turned on or off globally or on a per-model basis on both colorlcd and B&W radios. Have a helicopter that needs the heli tab, but don't want it showing on all your models? Or don't want to see it at all? The new "Enabled Features" button in the radio setup and model setup screens has got you covered! It looked like this during development.
- Numerous improvements to USB joystick support (allowing for greater control of how your radio controls are presented to the computer), as well as the ability to use your radio in conjunction to the radio simulator that is part of EdgeTX Companion.
- Support added for the Flysky FRM303 AFHDS3 RF module for some radios (NV14/EL18 native, TX16S with a mod, others to be documented). More information about the FRM303 here.
- Support added for the Multiplex MLink JR type module. See #3352 for more information.
- Numerous DSM telemetry fixes thanks to @frankiearzu via #3615, #3366, #3126 and #3690
- B&W screen radios: The time is now shown on the main screen between the horizontal trim sliders.
- B&W screen radios: Some of the longer and less commonly used sections in the model settings are now collapsed by default - i.e. timers, throttle settings, pre-flight checks, greatly reducing the amount of scrolling necessary.
- Support for Hebrew was added to radio firmware for color LCD radios and a voice pack is also available.
- If you have noise or buzzing when using high RF power outputs and no audio is playing, there is now a mute option for most radios - see #3703, #3710
- For those using the FrSky R9M 2019 in ACCESS mode in conjunction with the hardware mod, a separate firmware is no longer required. Simply choose the "External Module" option in Radio Settings -> Hardware against the relevant Serial / AUX port. #2562
Aes liebs Grüessli
rOger
-
- Ähnliche Themen
-
-
Information
-
-
Wer ist Online
Total sind 3 Benutzer Online :: 0 registrierte Mitglieder und 3 Gäste (basierend auf Benutzern, die in den letzten 5 Minuten Aktiv waren)
Mit 188 Benutzern waren 10.01.2024 07:19 am meisten Online.
Registrierte Benutzer Online:
Legende: Administratoren, Moderatoren, Mitglieder